You need to remove the key from JVC, which is substantially flat metal strips used about 1 / 4 "wide and long 4". They slide on the sides of the lid, remove the sleeve. To use, remove the front panel and the trim ring that goes around the board. Once the trim ring is removed, you will see the slots shown on the keys, just press the buttons as far as I am every page, and it will issue its leaves, the locks in the sleeve. Make sure the plug wire located on the back and sleeves for the mounting of the lid away from there, you will need both for future installations.
If you do not have the keys of the JVC or something that works like it, then go into a provider of JVC or Pioneer (Pioneer uses the same key-type) and usually you can rent or buy.
You need to remove the key from JVC, which is substantially flat metal strips used about 1 / 4 "wide and long 4". They slide on the sides of the lid, remove the sleeve. To use, remove the front panel and the trim ring that goes around the board. Once the trim ring is removed, you will see the slots shown on the keys, just press the buttons as far as I am every page, and it will issue its leaves, the locks in the sleeve. Make sure the plug wire located on the back and sleeves for the mounting of the lid away from there, you will need both for future installations.
If you do not have the keys of the JVC or something that works like it, then go into a provider of JVC or Pioneer (Pioneer uses the same key-type) and usually you can rent or buy.
3 comments:
You need to remove the key from JVC, which is substantially flat metal strips used about 1 / 4 "wide and long 4". They slide on the sides of the lid, remove the sleeve. To use, remove the front panel and the trim ring that goes around the board. Once the trim ring is removed, you will see the slots shown on the keys, just press the buttons as far as I am every page, and it will issue its leaves, the locks in the sleeve. Make sure the plug wire located on the back and sleeves for the mounting of the lid away from there, you will need both for future installations.
If you do not have the keys of the JVC or something that works like it, then go into a provider of JVC or Pioneer (Pioneer uses the same key-type) and usually you can rent or buy.
You need to remove the key from JVC, which is substantially flat metal strips used about 1 / 4 "wide and long 4". They slide on the sides of the lid, remove the sleeve. To use, remove the front panel and the trim ring that goes around the board. Once the trim ring is removed, you will see the slots shown on the keys, just press the buttons as far as I am every page, and it will issue its leaves, the locks in the sleeve. Make sure the plug wire located on the back and sleeves for the mounting of the lid away from there, you will need both for future installations.
If you do not have the keys of the JVC or something that works like it, then go into a provider of JVC or Pioneer (Pioneer uses the same key-type) and usually you can rent or buy.
JVC no buttons located on the side of the radio and you can delete it
Post a Comment